Here is the fourth and last step from our guide to making your own woodland candle holder.
Make a Woodland Candle Holder
Step 4: Finishing Touches
|Step 4: Applying the Tissue Paper Layer|
|Once the first layer of glue is dry, you’re ready to apply the layer of tissue paper over the botanicals.
Rip the tissue paper into small pieces, about one inch wide or tall. Ripping is preferred over cutting, since it will provide a more organic look on the finished product.
|Like you did with the first layer, apply a thin layer of glue right on top of your botanicals. Place your piece of tissue paper over the top and then apply another thin layer of glue to keep it in place.|
|Continue this process until you’ve covered the entire outside of the glass container. The pieces should overlap a bit, too, so no glass shows through.|
|You can choose to incorporate a couple colors of tissue paper. We chose a gold color to use as a band at the top and bottom of the glass container. Get creative. You can alternate colors in the overall layer, or go for an ombre effect: use tissue paper in the same color family and vary the design from lightest to darkest, using a single band of each shade around the glass.|
|For a clean look, feel free to use scissors to trim around the edges of your design.|
| Your flower and leaf design should magically appear when a candle is lit inside.
And all that’s left to do now is inserting a tea light and lighting your candle for a wonderful, rustic ambiance—perfect for your dining table or bedroom dresser. Enjoy!
|What You'll Need||Determining Design||Gluing the Botanicals||Finishing Touches|